Motorraum: Einspritzduesen superbillig in USA

[Erich]

 Hier der Link zum Lieferanten von BOSCH ESD

Ausserdem werden immer die ESD fuer den Mustang fuer 7er angepriesen auf roadfly. Hier einige Kommentare:
----------
Hello, I just installed a set of mustang injectors from fiveomotorsport. I am quite pleased with the results. Stumbling idle, and hesitation have been cured. Low end torque is slightly improved as well. Best $140 I have spent under the hood so far. PITA factor was a little higher than expected, but overall it was an easy job.

Stefan
1989 735i Euro 5-speed
------------
Congrat's on the injector install. Did you get the Series 2 or the Series 3? I put in the FOTE - D5B Mustang 19 lb/hr Series 2 injectors a few years ago & had the same results you stated, & they're still working great. Did you use the stock Mustang o-rings that came with them or change them out to BMW o-rings? I used the Mustang o-rings that came with them & they slid in awefully loose but haven't had any leakage problems.

The only downside I've noticed is they tend to load up easily so I run 2 oz. of fuel injector cleaner per tank, skipping a dose now & then. Maybe once a year I put the full 6 oz. per 10 gal. dose in a 1/2 tank of gas & run that thru it just prior to an oil change & gets them idling smooth as silk again.

gale
92 735i 5-spd, 165k
-----------------
Can I use the same Injectors or my 750

I'm Interested - Can I use the same Injectors or my 750 - Or do I have to research for another Mustang part number - Thanks !
-----------------
The stock m70 injectors are the same as the what the e36 m50 uses, which is approx. 14 lb/hr. Check the 3rd & 4th columns. The Design 3 is an improvement over the Design 2 spray pattern but either will work.

---------------------