Getriebe: 750 end bearing part number

[Erlingur]

Hello E32 friends,

I need to change the end bearing in my ZF on my 750 '91.
Can you tell me the factory number of the bearing (specific size), I assume that the bearing is much cheaper if I buy it from my local bearing dealer SKF or FAG/INA than from the BMW dealer.

According to real oem it is needle bearing 35x42x12 I assume that it should be easy go buy that one, but do you think that I need the inner ring also, and is possible to get the inner ring off with the trans under the car.


I would also need the size and number for the rear seal.

I just bought two valve cover gaskets that did cost more than full tank (100L) of 98 okt gas on my car

Best regards from Iceland

[Erich]

you will only know the part number of the original maker when the bearing is out and you see the maker and the maker part number.
As usual, the transmission makers do not use the same number in their parts list, to confuse people like you who want to buy is cheaper
maybe this helps
 http://www.jpat.co.uk/jpat_pdfs/ZF%2...20%204HP24.pdf
check their site
 Europeantransmissions*and...
 http://www.zf.com/na/content/media/i...E39D80CAD0DA=1

buy a repair manual
 http://www.zf.com/na/content/media/i...Literature.pdf

 ZF4HP24, zf 4HP24 :: Korobka.com :: Catalog of Parts for Automatic Transmissions

or buy from Zcech Republic maybe cheaper
 The list of the automatic transmission types - KAPS Automatické pøevodovky

Next time we do one, I can check, but no schedule to repair one now, too cold.

[Erlingur]

Thank you for this.

I'll look through this information and see what I find.