Sie sind nicht angemeldet! Jetzt interner Link kostenlos im Forum registrieren, weniger Werbung sehen, aktiv teilnehmen und weitere Vorteile nutzen! Diese Website nutzt Cookies. Bitte beachten Sie unsere interner Link Datenschutzerklärung.
  Start » Forum Impressum/Datenschutz | Site-Map
7-forum.com   ModelleForummein.7erService


Forumsfunktionen

BMW 7er, Modell E32
 Varianten
 Detail-Infos
 Interaktiv
- Anzeige -

Zurück   BMW 7er-Forum > BMW 7er Modelle > BMW 7er, Modell E32 > E32: Tipps & Tricks



 
 
Thema teilen Themen-Optionen Ansicht
Alt 13.06.2005, 17:59   #2
Erich
Shogun
 
Benutzerbild von Erich
 
Registriert seit: 19.07.2002
Ort: Joso
Fahrzeug: E32 750iL 11/88
Standard so, gerade Bilder von Ron aus USA bekommen

Text:
Here are the pictures of the upper oil pan gasket repair.
I won't go into the step by step. Hopefully the pictures will be all you need. The key is the engine has to be supported from above.

Good luck.

Paparon
---------------------
Shogun,
Here are my photos of how I did the upper oil pan.
I drilled 3 1/2 inch (13mm) wholes and then used a die grinder
to connect the 3 holes so I could see where the bolts were.
The last picture is of what I had to remove to get the upper pan out
Basically the subframe and all the suspension. Sway bar and the rear support units.

The exhaust does not have to be removed. It is off because I am doing the
rear diff at the same time so it had to be removed to get the drive shaft off of the diff.

I sent these to you in case someone needs to see them before I get around to posting.
I'll reduce them as well.

Ron




Erich ist offline   Antwort Mit Zitat antworten
 


Aktive Benutzer in diesem Thema: 1 (Registrierte Benutzer: 0, Gäste: 1)
 

Forumregeln
Es ist Ihnen nicht erlaubt, neue Themen zu verfassen.
Es ist Ihnen nicht erlaubt, auf Beiträge zu antworten.
Es ist Ihnen nicht erlaubt, Anhänge hochzuladen.
Es ist Ihnen nicht erlaubt, Ihre Beiträge zu bearbeiten.

BB-Code ist an.
Smileys sind an.
[IMG] Code ist an.
HTML-Code ist aus.
Gehe zu

Ähnliche Themen
Thema Autor Forum Antworten Letzter Beitrag
Synchronisieren V12 M70 Motronic Steuergeraete Erich E32: Tipps & Tricks 2 03.02.2011 11:14
Motorraum: Revision M70 V12 und Getriebe Erich E32: Tipps & Tricks 3 27.02.2008 07:39
M70 V12 Technische Beschreibung von 1987 Erich BMW 7er, Modell E32 0 13.05.2004 14:09
Wie Xenonbrenner wechseln beim V12? KJ750IL BMW 7er, Modell E38 2 17.04.2004 13:07
Wechsel der Dichtung für Kettenspanner beim M70 V12-Jodler BMW 7er, Modell E32 1 24.03.2004 09:59


SiebenPunktSieben - das siebte 7er-Jahrestreffen - jetzt den Foto-Bericht anschauen!
Alle Zeitangaben in WEZ +1. Es ist jetzt 19:05 Uhr.

7-forum.com Forum Version 6 powered by vBulletin
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Mit der Nutzung des Forums erklären Sie sich mit den Nutzungsbedingungen einverstanden.
 

 
www.7-forum.com · Alle Rechte vorbehalten · Dies ist kein Forum der BMW Group