Elektrik: Pdc E32 From 8 To 4 Sensors

[javierrr]

Ive read some mails about how to switch from 8 to 4 sensors.
Some one said pin 1 from X300 switch to 12V. I just want to CONFIRM the laid out.

PIN-Stecker-Benennung
1-X300-12V
2-X300-TXD
3-X300-
4-X300-
5-X300-RXD
6-X300-Tacho A Signal
7-X300-
8-X300-Gong PDC hinten
9-X300-Schalter PDC
10-X300-
11-X300-
12-X300-Masse
13-X300-Stromverteiler unter Rücksitz F31
14-X300-Signal Rückwärtsgang
15-X300-Gong PDC vorn
16-X300-Schalter PDC
17-X300-
18-X300-
19-X300-Sicherungskasten Motorraum F12
20-X300-
21-X300-
22-X300-
23-X300-
24-X300-
25-X300-
26-X300-Gong PDC hinten

Please someonen confirm this laid out. I am not sure about pin 13 y 19.
Thanks
Javier

[Joe735]

hello javier,

i confirm this information.
to switch from 8 to 4 Sensors, put 12 Volt on Pin 1
8 Sensors = 0 Volt
4 Sensors = 12 Volt

greetings Joe735

[_65536_kb_sec_]

Hello,
Since I saw this thread i wanted to ask if someone has the electrical Scheme of the PDC system, because i've "implanted" the whole system into my car, with all of the 8 sensors, but the problem is that the button doesn't operate when i'm using the headlights.

[pegasusqmb]

Hallo,

gibts sowas auch in deutsch???

Hello,

does this Thread also exists in german?

Thanks a lot.

Greeting

pegasusqmb