[Getriebe]: ZF Getriebefehler, moegliche Fehler, wie beheben

[Erich]

Ganz Klasse gemacht
Hier mal ein Beispiel:

A - ABNORMAL SHIFTS
• Shifts Occur at Too High Speed
• Shifts Occur at Too Low Speed - Full Throttle
• Rough Shifts
• No Specific Shift; i.e.., 1-2, 2-3, 3-4, 4-5 (Up or Down)
• Excessive Engine Flare

A - ABNORMAL SHIFTS ALL MODELS

Condition Probable Causes Suggested Remedies
Shifts Occur at Too High Speed 1. Governor valve malfunctioning (stuck). 1. Clean or replace governor screen and/or governor.
2. Vacuum modulator vacuum hose to engine kinked or leaking - light throttle shifting delayed. 2. Replace hose. Be sure vacuum line is free from kinks or bends and not close to exhaust components.
3. Modulation delayed (vacuum). 3. Replace vacuum modulator. Be sure that O-ring is installed.
4. Mechanical actuator cable kinked, broken or not properly adjusted. 4. Replace, adjust, or repair cable. Full actuator control cable travel must correspond with full throttle.

und so weiter

 http://www.zf-transmissions.com/troubleshooting.htm