Zitat:
Zitat von Schnupperboller
Hallo, Bitte zuerst prüfen, ob die Stecker für Kurbelwellensensor und OT nicht vertauscht sind, die sind gleich und man kann sie vertauschen. Mfg Schnupperboller,
|
und das ist selbst Im Bentley Buch verkehrt angegeben
BMW -- servicemanuals
M70 engine only: at page 120-10, 2nd picture down, the picture shows the plugs for the crankshaft sensor and cylinder identification sensor (pulse wire). According to Bentley, the 2 top plugs are the crank sensor plugs, and the bottom 2 are the ones that go to the spark plug wires. This is obviously wrong. Looking at the picture, the left top plug is the crank sensor bank 1-6, left bottom plug is the spark plug sensor bank 1-6, right top plug is the spark plug sensor bank 7-12 and finally right bottom plug is the crank sensor bank 7-12. Also this is checked in the factory manual.