wegen dem Memory geh auf meine Seite, lange Beschreibung unter seat and mirror memory
http://www.e38.org/e32/BMW_pdfs/smm.pdf
Kopfstuetzen: oder das Kabel zu lang wie auch bei den Rueckenlehnen
http://www.nmia.com/~dgnrg/page_33.htm
oder so: einfach ein Stueck Draht einsetzen:
headrest fix-Q's famous coat hanger trick
Message: It's still hard to believe, even after doing it, but the Coat Hanger Trick Works !!
If you are referring to the front seat headrests...then once you remove the back cover, peel back some of the leather from the tongs near the motor that should be mounted on the right side...remove the 2 screw that hold the motor (a right angle screwdriver makes this a lot easier)...then remove the screws on the bottom of the motor that secures the cable...pull the cable out. HERE'S THE QUICK TIP: take a 1/4" piece (straight) of metal coat hanger and place into the motor drive, then re-insert the cable. Test to make sure headrest is working then put everything back together. I know it sounds weird but it has worked for me and I did the procedure 2 years ago.
IMPORTANT TIP: make sure you don't use a too long piece of metal because then the cable will not engage the drive and the headrest still won't work. The "metal extension" serves to re-center the cable within the sheathing.
Q
91 735iL