Zitat
Hi Erich, see if you can slide the outer jacket back from the connector and 1) seehow many wires there are 2)identify the colours. If you have 2 wires and they are either 1) red with white and yellow tracers and 2) brown with yellow and white tracers............... or 1) brown and 2) red with white tracer, then the plug/wiring is for one of the two evaporative purge valves. hope this is of some help , Iam not sure if your engine is an early production M-70 or not, but let me know if the colours correspond or not. Regards, Matthew.
--
Matt B. 750il,635 csi.
Zitat Ende
Kann mal jemand -der es drin hat -nachsehen nach den Kabelfarben.
Ich gebe ja immer noch nicht auf.
