hier die Antwort:
Dear Erich,
ok, here is advice for everybody. I hope they could understand.
the external connector, this is use for starting all 4 windows open
and close automatically function, not use by front each window
switch panel.
example, if connector number 1 and number 2 close by another switch
or use by relay, the unit will work all 4 windows close like front
driver and passenger switch close function at same time.
number 3 and number 4 close by another switch or use by relay, the
unit will work all 4 windows open.
this mean you don't have to touch anything window switch module,
the funciton can control from another external switch or add on
security control open close signal. number 2 and number 4 is
12(-) line, if 12(+) come to this line the functional will start.
but you have to be careful with one thing, this unit activates by window
switch power line. this power line is not activated all time
(not HOT line), it works on acceleted time or off acceleted after
a few minutes holding power line. If you operate after closing
power line, external function doesn't work.
If owner would like to operate any time, they have to make power
assist by relay at same time external switch on.
Mitsu,
-----------------------
Ende der Nachricht, Stromlaufplan PWX4.DSN bekommst Du per email.
|