ich hoffe, du hast nicht beim verkleben der öffnungs- und schließkontakte einen davon zu streng festgeklebt. vielleicht sind die batterien aus diesem grund schon wieder leer.die leuchtdiode sollte schon schön rot leuchten. falls du der englischen sprache mächtig bist, dann versuch dies mal:
Checking if your IR remote funtions:
If you are doubting wheter your IR remote is working try holding the remote about 10 mm from a reflecting surface. A mirror should do just fine. Push the open button. After the intervall blinking the LED will remain on. Now try holding the remote close to a non reflecting surface. Press the open button. Now the LED should go off after the intervall blinking.
Send in by Erich
ist von johan`s seite, danke nochmal.
gruß,felice!
|