siehe mein Beitrag 48 Relay Module modification (disable deadlocks)
da ist doch alles beschrieben wie man das Doppellock beseitigen kann.
Kopier den englischen Text und nimm Uebersetzungslink.
hier noch was
https://www.bimmerforums.com/forum/s...-System-on-E32
und hier noch detaillierter auf meiner Seite
https://twrite.org/shogunnew/files/d..._CUT_PIN14.pdf
The E32 DEADBOLT LOCK function is not our friend. To prevent this from operating in your door lock motors, you can break off PIN 14 of the BLK X258 connector on the RM module, under the rear seat. This will prevent any current from flowing in the BLK wire of the Door Lock Motors. Here I have drilled out PIN 14 (not so easy) but you can just break off the pin using needlenose pliers.
Die E32-Riegelschlossfunktion ist nicht unser Freund. Um dies in Ihren Türschlossmotoren zu verhindern, können Sie PIN 14 des BLK-Steckers X258 am RM-Modul unter der Rücksitzbank abbrechen. Dadurch wird jeglicher Stromfluss im BLK-Kabel der Türschlossmotoren verhindert. Hier habe ich PIN 14 aufgebohrt (was nicht ganz einfach ist), aber Sie können den Stift einfach mit einer Spitzzange abbrechen.