i have fitted the original webasto remote to countless cars before so know that side of things .
i have now fitted the module from Belarus that uses the original car fob for opening and closing of the car .their is no need to pull a cable from the cas module to the antenna amp in the rear right c pillar ,that is very good now .
so only 2 wires fit into the cas original slots ,2 more clip onto cas wires and 2 more clip onto wires from the ihka module ,very simple 10 min job.i found it easier to just remove the big wood trim with center vents as you need the room .you then code the car as per the original webasto remote for aux heating or and independent ventilation .the part i found hard was pairing the Belarus module to the car and then pairing the original key fob to the remote ,its a pain counting the flashes of the alarm lol. and yes 3 presses of the lock button start the engine and will lock the car if its unlocked and 2 presses of the lock will shut it off and u can program it to run webasto and then start the car when up to temp and so on.in my opinion it is better than the webasto remote as its a pain to carry 2 remotes around as the webasto remote is far too bulky .i have a video of it working on my car if anyone wants to see it just ask
|