Bedienteil ausbauen der IHKA ist eine Klacksache. Schau bei E32 unter Tipps und Trciks.
Neuen Einbauschacht brauchst Du von BMW. Preis kenne ich nicht, duerfte aber nicht allzu viel kosten, weil er oefter mal erneuert wird, weil einige die Hebel abbrechen bei Ein/Ausbau. Geschaetzt 10-15 EURO.
Wier erfahren Du bist, kann ich natuerlich schlecht beurteilen. Aber Anleitungen hast Du ja jetzt genug.
Hier gerade gefunden, wie du die IHKA ausbaust. Bilder:
Put a screwdriver into the hole you created by removing the cover.
Use the screwdriver to push in the end of the clip so it will slacken at the front. If you do this correctly the panel will pop out just like that. If you do it incorrectly or if you don't use enought pressure you will end up cursing why it won't come out. Do take your time as you don't want to break this overpriced control panel. Don't worry about the clip as it's only one or two euro from the dealer ;-)
Now remove the two or three (if you have a independant heater or ventilation system) connectors from the panel. Yes! The panel is free and you can take it into the house where it's warm (it's currently 0 degrees Celcius over here).