BMW 7er-Forum - Einzelnen Beitrag anzeigen - Motorraum VANOS noise fixed.......but another problem.

Glacier · 06.08.2010, 15:28

2000 E38 740i M62TU 04.04 101.000 MILES .

Hi, apologies for not speaking German .

I had the 'startup rattle 'and a noise the same as this video:

YouTube - ‪M62B35 Ticking‬&lrm;

After a lot of research, I concluded that it was coming from the VANOS units.

The E38 M62TU engine should not sound like a diesel .......... right?

So, I bought two new units , No.1 :

RealOEM.com BMW E38 740i timing gear timing chain top - VANOS

And two new oil check valves , No.8 :

RealOEM.com BMW E38 740i Cylinder Head Attached Parts

Also the timing tools:

Here are the old VANOS units:

And the new VANOS units:

Now I am happy to report that the engine is nice and quiet, no more embarrassing tapping/knocking/diesel like noise. Also, no more startup rattle : Top

The problem is that the engine feels slightly ' lumpy '.

The idle is at 600 rpm and is steady. When the accelerator is pressed (car not moving) , there is a slight vibration up to 1200 rpm and then smooths out .

When driving along, at any speed, it feels like you are going over lots of ' bumps ', but the road is smooth.

I connected Carsoft V8.3 and there were no fault codes. I then took it to BMW for diagnostics ......... ........ same result no fault codes.

I tested for vacuum leaks ......... none .

Any ideas anyone?

06.08.2010, 15:28	#1
Glacier Neues Mitglied Registriert seit: 03.08.2010 Ort: Runcorn, near Liverpool Fahrzeug: E38 - 740i (02/2000)	VANOS noise fixed.......but another problem. 2000 E38 740i M62TU 04.04 101.000 MILES . Hi, apologies for not speaking German . I had the 'startup rattle 'and a noise the same as this video: YouTube - ‪M62B35 Ticking‬&lrm; After a lot of research, I concluded that it was coming from the VANOS units. The E38 M62TU engine should not sound like a diesel .......... right? So, I bought two new units , No.1 : RealOEM.com BMW E38 740i timing gear timing chain top - VANOS And two new oil check valves , No.8 : RealOEM.com BMW E38 740i Cylinder Head Attached Parts Also the timing tools: Here are the old VANOS units: And the new VANOS units: Now I am happy to report that the engine is nice and quiet, no more embarrassing tapping/knocking/diesel like noise. Also, no more startup rattle : Top The problem is that the engine feels slightly ' lumpy '. The idle is at 600 rpm and is steady. When the accelerator is pressed (car not moving) , there is a slight vibration up to 1200 rpm and then smooths out . When driving along, at any speed, it feels like you are going over lots of ' bumps ', but the road is smooth. I connected Carsoft V8.3 and there were no fault codes. I then took it to BMW for diagnostics ......... ........ same result no fault codes. I tested for vacuum leaks ......... none . Any ideas anyone?